|
Post by baroquelesnar on Oct 17, 2015 21:26:30 GMT
i uploaded my models from Sketchup but most of them have missing parts or have some white textures, what0s the reason of it?
|
|
|
Post by NicusorN5 on Oct 18, 2015 10:56:06 GMT
Try exporting with "Export as Skinmesh with backfaces" .
|
|
|
Post by n_iron on Oct 21, 2015 6:49:19 GMT
Hi, when the original artist made the mesh they did not take notice of which way the faces where facing that's the problem, this happens a lot with 3dwearhouse mesh. To fix it you must reverse the faces, now its been a while since I did this. Open the original mesh in Sketchup, turn off the colors/textures, faces only. You should be able to see a white mesh with some faces slightly dark or blue shade than others which should be white. From Edit menu there is flip faces, highlight the face then hit the key to flip the dark faces, it should then be white like the rest. Keep doing this until all faces have been flipped. Then turn back on the color and texture. The only problem is you may have to reapply the textures because they may now be on the inside. Exporting with back faces can fix it but you will get other problems like mesh flickering, dark patches and the main thing twice as many pollies that you really need. Once you fix it you can export it into 3DRAD with out back faces. n_iron
|
|